Thyristor Parallel Resonant Melting Furnace
video
Thyristor Parallel Resonant Melting Furnace

Thyristor Parallel Resonant Melting Furnace

Thyristor parallel resonant melting furnace 1. In terms of carrying capacity. Thyristor is a mature power semiconductor component, and the current technological level can stably provide 2700A/2500V level components and 8000kW full bridge parallel inverter solid-state power supply. 2. In terms of...

Thyristor parallel resonant melting furnace

1. In terms of carrying capacity. Thyristor is a mature power semiconductor component, and the current technological level can stably provide 2700A/2500V level components and 8000kW full bridge parallel inverter solid-state power supply.

product-800-800

2. In terms of power factor. When the SCR full bridge parallel inverter operates at rated output power, the power factor on the grid side is close to 1. The output power decreases, and the power factor on the grid side also decreases accordingly.

product-800-800

3. In terms of load adaptability. In an induction furnace, during the process of heating the furnace material from room temperature to a molten state, the impedance variation range of the induction coil can usually reach 1.7:1. In order to ensure that the power supply always outputs the rated power, the load adaptability of the power supply must be able to meet the requirements of the impedance changes of the electric furnace. A typical SCR full bridge parallel inverter cannot output rated power throughout the entire melting process. After improvement, it can have the ability to output near constant power, but still cannot fully achieve constant power output.

product-800-800

4.  In terms of working frequency. SCR full bridge parallel inverters should not operate at excessively high frequencies, generally not exceeding 2500Hz.

product-800-800

5.  In terms of overcurrent capacity and overcurrent protection of the device. When a thyristor through short circuit fault occurs in an SCR full bridge parallel inverter, the filtering inductor in series with the DC circuit can limit the increase of short-circuit current and generally will not damage the thyristor components.

Hot Tags: thyristor parallel resonant melting furnace, China thyristor parallel resonant melting furnace manufacturers, suppliers, factory, induction furnace power controller, induction furnace power problem, induction furnace power fault, induction furnace power monitoring, induction furnace power safety, induction furnace power supply

Send Inquiry