The furnace body structure of the hydraulic tilting steel shell melting furnace consists of a furnace shell, a magnetic yoke, an induction coil, a hydraulic oil cylinder, a hydraulic station, and a hydraulic control console. The furnace shell adopts an integral skeleton structure; The tilting of the furnace body is controlled by a hydraulic system, which is lifted by two hydraulic cylinders on both sides of the furnace body. The resetting of the furnace body is achieved by the pressure generated by its own weight.
The furnace shell of the hydraulic tilting steel shell melting furnace is a frame structure made of welded channel steel and steel plates. The specifications of the channel steel mainly include national standard 16 # B-type channel steel. The bottom of the furnace is made of Q235 # steel plate with a thickness of 25mm, and the top cover plate is made of 15mm patterned plate. The bottom is supported by channel steel and welded to the frame. The front baffle of the furnace is made of 8mm steel plate to prevent thermal deformation. The lower part of the furnace shell has a fixed bracket for the lining ejection mechanism, which is welded with 20mm thick national standard steel plate. The furnace shell is equipped with multiple sets of imitation magnetic yokes. The shielding of the magnetic yokes can reduce magnetic leakage and prevent the furnace body from heating up, improve electrical energy efficiency, and support the induction coil to increase strength. It is easy to disassemble and repair the coil, observe, and dissipate heat without removing the magnetic yoke. The fixed frame is a bracket for fixing the furnace tube, using high-strength integral square tube components, and the bottom plate is welded with 25mm Q235 steel plate, 16 # B-type channel steel, etc., to ensure long-term use without deformation. Design the furnace cover separately, using 8mm or more head welding, and the steel plate lining adopts aluminum silicate structure for insulation, so that the furnace cover has the dual advantages of high temperature resistance and good sealing. The furnace cover adopts hydraulic lifting, and the opening and turning of the furnace cover are manually operated. There is an observation hole on the top of the furnace cover for easy temperature measurement. Covering the furnace lid during heating can reduce heat loss, lower electricity consumption, and lower production costs. Improve the furnace cover section in conjunction with our factory's equipment. Only one set of hydraulic cylinders is needed to complete the lifting, lowering, rotating, and returning of the furnace cover.
Hot Tags: hydraulic tilting steel shell melting furnace, China hydraulic tilting steel shell melting furnace manufacturers, suppliers, factory, hydraulic station, closed circuit fluid coolers, furnace pulse transformer board, stainless steel bolts, fiberglass insulation board, air cooled water cooled scr heat sinks