Blog

Structural form and characteristics of aluminum melting furnace

May 15, 2024 Leave a message

 

1. Adopting circular bottom furnace and reasonable burner configuration, the furnace gas circulation is strong, the furnace temperature is uniform, there is no local overheating and overburning phenomenon, the product quality is improved, and the service life of the furnace is extended.
2. Adopting vertical furnace: the furnace charge fully absorbs the flue gas waste heat in the vertical furnace, reduces the exhaust temperature of the furnace top, greatly improves the thermal efficiency, and the furnace charge has been preheated to a state close to melting when entering the bottom furnace, ensuring a high melting rate and very low energy consumption.
3. Adopting air preheater and furnace shell interlayer air duct: the air preheater absorbs the flue gas waste heat very well, and the preheated air enters the furnace shell interlayer air duct, further preheating and heating, relatively increasing the ambient temperature, reducing the heat dissipation of the furnace shell, and the air preheating can improve the combustion efficiency, combustion intensity, flame temperature and speed, and strengthen the furnace gas circulation and heating speed.
4. The furnace door structure is reasonably sealed, and there is no need to add a furnace at the furnace door; the furnace door is tightly sealed, the opening time is short, the heat dissipation loss in the furnace is small, there is no dead corner for slag removal and refining, it is easy to operate, and the operating environment is good.
5. Furnace top charging: convenient charging, low labor intensity, small furnace temperature fluctuation, long furnace life, charging does not take up melting time.
6. Adopting high-efficiency energy-saving burner as heat source, it has the characteristics of easy ignition, fast heating, high spray speed, safe combustion, and small excess air coefficient.

Send Inquiry