A typical water cooling system must have the following components: water cooling block, circulating fluid, water pump, pipes and water tank or heat exchanger. The water cooling block is a metal block with water channels inside, made of copper or aluminum, which contacts the CPU and absorbs the heat of the CPU. The circulating fluid flows in the circulating pipes by the action of the water pump. If the liquid is water, it is what we commonly call a water cooling system. The liquid that absorbs the heat of the CPU will flow away from the water cooling block on the CPU, and the new low-temperature circulating fluid will continue to absorb the heat of the CPU. The water pipe connects the water pump, water cooling block and water tank. Its function is to allow the circulating fluid to circulate in a closed channel without leakage, so that the liquid cooling system can work normally. The water tank is used to store the circulating fluid, and the heat exchanger is a device similar to a heat sink. The circulating fluid transfers heat to the heat sink with a large surface area, and the fan on the heat sink takes away the heat from the air flowing in.
Water cooling and air cooling are essentially the same, except that water cooling uses circulating fluid to move the heat of the CPU from the water block to the heat exchanger and then dissipate it, replacing the homogeneous metal or heat pipe of air cooling. The heat exchanger part is almost a replica of the air cooling radiator. The biggest features of the water cooling system are two: balancing the heat of the CPU and low noise operation. Since the specific heat capacity of water is very large, it can absorb a large amount of heat without significantly changing the temperature. The temperature of the CPU in the water cooling system can be well controlled, and sudden operations will not cause a sudden and drastic change in the internal temperature of the CPU. Since the surface area of the heat exchanger is large, only a low-speed fan is needed to dissipate the heat to achieve a good effect. Therefore, water cooling is mostly equipped with a low-speed fan. In addition, the working noise of the water pump is generally not very obvious, so the overall cooling system is very quiet compared to the air cooling system.
Water cooling, an expensive and complex cooling method, is the most powerful operational radiator for PCs (cooling methods such as liquid nitrogen cannot be put into practical use). Overclocking players with an exploratory spirit have been using it to create overclocking limit records a few years ago. The product itself has also changed from early homemade products to mass production designed by professional manufacturers and sold in retail channels. With the expansion of production scale and the gradual accumulation of design and manufacturing experience, we can now buy quite cheap brand-name water cooling radiators. Their value is no longer as high as it used to be, even exceeding the total price of the user's CPU and motherboard. In addition to the attractiveness of price, the humanized design of the latest water cooling products has also made great progress. Various reasons have contributed to the current situation where water cooling radiators can enter the chassis of ordinary DIY players.
Functional Principle Of SCR Water Cooling Radiator
Jun 24, 2024
Leave a message
Send Inquiry

