News

Introduction To SCR Water-cooled Radiator

Jun 23, 2024 Leave a message

 

The water-cooled cooling system uses a pump to circulate the coolant in the heat pipe and dissipate heat. The heat-absorbing part on the radiator (called the heat-absorbing box in the liquid cooling system) is used to absorb heat from the computer CPU, north bridge, and graphics card. The heat absorbed by the heat-absorbing part is discharged to the outside of the host through the radiator designed on the back of the fuselage.
In the field of personal computer cooling today, although air-cooled radiators have basically escaped the vicious circle of high-noise violent heat dissipation, they are generally developing in the direction of large volume, multiple heat pipes, and overweight, which brings great inconvenience to users in the actual use and installation of radiators, and also puts a great test on the load-bearing and pressure-bearing capacity of computer accessories. In view of the above-mentioned difficulties in the post-air-cooling era, water-cooled radiators are gradually accepted by the majority of computer users.
As a mature heat dissipation technology, water-cooled heat dissipation has always been widely used in industrial ways, such as the heat dissipation of automobiles and aircraft engines. The application of water-cooled heat dissipation technology in the computer field is not because air-cooled heat dissipation has reached its end, but because the heat dissipation speed of liquid is much greater than that of air, so water-cooled radiators often have good heat dissipation effects, and the noise can also be well controlled. Due to its advantages in heat dissipation efficiency and quietness, water cooling radiators appeared soon after air cooling became popular. Fortunately, water cooling in the computer field is becoming popular today, and this is due to the great progress in the safety and stability of liquid cooling.

Send Inquiry